Correct installation of the butterfly valve

-
1, the installation position, height, import and export direction must meet the design requirements, the connection should be firm and compact 0.2), all kinds of manual valves installed on the insulation pipe, the handles must not be downward.
2, the valve must be visually inspected before installation, the nameplate of the valve should comply with the current national standard “General Valve Mark” GB 12220. For valves with a working pressure greater than 1.0 MPa and a shut-off function on the main pipe, the strength and tight performance tests shall be carried out before installation, and shall be used after passing the test. In the strength test, the test pressure is 1.5 times the nominal pressure, the duration is not less than 5 minutes, and the valve casing and the packing should be qualified without leakage. In the rigorous test, the test pressure is 1.1 times of the nominal pressure; the test pressure shall meet the requirements of GB 50243 in the duration of the test, and the leakage of the valve sealing surface shall be qualified.
The wafer type butterfly valve is one of the most common types of valves in industrial pipelines. The structure of the wafer type butterfly valve itself is relatively small. Just put the butterfly valve in the middle of the flanges at the two ends of the pipeline, and use the double stud bolts to pass through the pipeline flanges and pairs. Clip-on butterfly valves lock the fluid medium in the line. Wafer-type butterfly valves are especially suitable for places where space is limited or where the distance between pipes is short. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the only resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very low. Small, so it has better flow control characteristics.

评论

  1. Online Tips2019年9月24日 03:02

    i really like this article please keep it up.
    will help you more:
    http://anixusa.com/

    回复删除
  2. henry2021年5月19日 12:11

    Once was a young company, after two decades of elaboration, DBV Valve has now become an established manufacturer that had earned high customer satisfaction. We will keep devoting ourselves, providing the best services and products to our customers worldwide. DBV valve

    回复删除
  3. donnaj edwards2021年5月21日 07:13

    Wow what a great blog, i really enjoyed reading this, good luck in your work. Taiwan valve online

    回复删除

发表评论

此博客中的热门博文

All About Gate Valves

-
图片
  A wedge type gate valve. Image credit: al7/ Shutterstock.com Gate valves, or sluice valves, are mainly used to block or permit fluid flow through pipes. They are not good at regulating flow for which other valve designs, such as globe valves, are better suited. Ball valves are another on/off valve type unsuited to throttling.  Gate valves  offer a size advantage over these other types in terms of how much space must be allotted between pipe flanges to accommodate the valve. For information on other types of valves, please see our Valves Buyers Guide. Valve design Gate valves consist of three major portions, the valve body and seats, the gate (or disc) and stem, and the packing and bonnet. In operation, the body and seats remain stationary while the threaded stem rotates to lift the gate off its seats. Stem rotation is accomplished manually through a handwheel or automatically via a valve actuator. The bonnet houses the disc while the valve is open and provides a lo...
阅读全文

How to Identification of BSPP,BSPT, NPT threads?

-
图片
  How to Identification of BSPP,BSPT, NPT threads? When you choose valves and pipe fittings , thread is a very important feature you have to consider. No matter how well the product is made, a wrong thread type will make it useless. You have to determine the thread type before you order. British Standard Pipe fittings are among the most popular of all foreign threads in the world today. These threads come in two versions: parallel (BSPP), and tapered (BSPT). The thread flank angle for both tapered and parallel British threads is 55°. Although BSP is a foreign thread, it isn’t actually metric. This is why it comes in Imperial sizes: 1/8, 1/4, 1/2, 3/4, etc. BSP parallel (BSPP) threads commonly seal via a 30° chamfer on the male thread to a 30° cone seat inside the female thread (swivel only). If it is a port application, an O-ring and washer, Elastomeric seal or a bonded washer are needed to achieve a proper seal for parallel threads. For tapered BSP threads (BSPT), a seal is accomp...
阅读全文